Ring Alarm in a power outage, and where OutagePing fits

When the power goes, a Ring Alarm Base Station switches to its internal battery and keeps protecting the house, and with a compatible Ring subscription it stays online over cellular backup even when the router dies. If you already have that, your home security is covered through a power cut. OutagePing is for what is left over: places without Ring, circuits the Base Station is not on, and waking other people at alarm volume.

What Ring Alarm does when the power goes

The Base Station battery

Ring says the Base Station's internal battery lasts up to 24 hours, depending on usage. For the first 15 minutes it works normally. After that it keeps monitoring sensors and sending alarm signals, and switches other features off to save battery. When the power comes back, the battery recharges.

Cellular backup

A power cut usually takes the router with it. If the Base Station loses its internet connection, Ring's cellular backup takes over so the system can keep monitoring the home. It needs a compatible Ring subscription (see Ring's plans for current prices). Without cellular backup, Ring says the system stays armed and the siren still works, but you cannot control it from the app while it is offline.

How you would know the power went

Ring's support pages describe two signs: the power light on the Base Station flashes yellow while it is on battery, and the battery icon on the Base Station's page in the Ring app reflects it. We could not find a Ring support article that spells out a push notification for power loss, so rather than guess either way: open the Ring app's Alarm alert settings and see what your system offers.

Ring AlarmPhone + OutagePing
Built forHome security, with optional professional monitoringKnowing a socket has lost power
Keeps running in a power cutYes, Base Station battery up to 24 hoursYes, on the phone's own battery
Stays connected without the routerYes, cellular backup with a compatible Ring subscriptionYes, with a SIM that has mobile data
Alerts through Do Not DisturbYes, for alarm, low-temperature and water alertsThe siren on the phone, yes; watchers are woken through silent mode
Other peopleShared Users, each with their own Ring accountAnyone with a 6-digit code, no account (Pro)
PhonesiPhone and AndroidAndroid 8.0 or newer only
CostHardware to buy; cellular backup needs a subscriptionFree app; waking other people is $7.99/mo or $79/yr

What Ring Alarm does better

Where OutagePing fills a gap

You do not have Ring Alarm

Buying a security system to find out the power failed is a lot of hardware for one question. OutagePing uses an Android phone you already have: leave it on a charger, arm it, and the alarm on that phone is free. The power outage alarm app page explains the whole sequence.

The place that matters is not where the Base Station is

A Base Station is plugged in at one place in one home. Think of Mum's flat across town, a holiday let, or the garage freezer on its own breaker. If that breaker trips while the house stays lit, the Base Station has nothing to report. A phone plugged into a wall socket on that circuit notices within seconds, even at 100% charge, because it watches the charger's power feed rather than the battery. For a parent living alone, see power outage alarms for elderly parents.

Someone needs waking, not notifying

OutagePing escalates. First a quiet popup on the phone, then by default 30 seconds later a loud full-screen siren that overrides silent mode and Do Not Disturb. With Pro, about three minutes after the power fails, our servers wake everyone watching that phone on their own Android phone at alarm volume, through silent mode. Dana and Chris type a 6-digit code into the free app; they need no account and no subscription.

The monitor itself might die

The phone checks in every 5 minutes. If it goes silent (battery flat, no signal, no Wi-Fi), our servers alert the watchers anyway, roughly 17 to 23 minutes after the power failed. With a cheap prepaid data SIM, the watchers hear in about three minutes instead.

What this does not do

OutagePing is not a security system and does not detect intruders, smoke, water or temperature. It only knows whether the socket the phone is plugged into has power. It does not send SMS or make phone calls, and there is no professional monitoring. It is not a certified life-safety or medical device, and it does not keep anything running: it is an alarm, not a battery. There is no iPhone version; the monitoring phone and the watchers' phones need Android 8.0 or newer. Setup is in the docs.

Questions people ask

Does Ring Alarm work during a power outage?

Yes. Ring says the Base Station's internal battery lasts up to 24 hours depending on usage. It runs normally for the first 15 minutes, then keeps monitoring sensors and sending alarm signals while switching other features off to save battery.

Does Ring Alarm notify you when the power goes out?

Ring's support pages say the Base Station's power light flashes yellow on battery, and the battery icon on the Base Station's page in the Ring app shows it. We could not find a Ring article that spells out a power-loss push notification, so check the Alarm alert settings in your Ring app.

Does Ring Alarm cellular backup need a subscription?

Yes. Ring says cellular backup is included with a compatible Ring subscription. See ring.com/plans for current prices.

What happens to Ring Alarm if my router loses power?

With cellular backup, Ring says the system switches to it and keeps monitoring your home. Without it, the Base Station goes offline: Ring says it stays armed and the siren still works, but you cannot control it from the app.

Do I need OutagePing if I already have Ring Alarm?

Only if you have a gap Ring does not cover: a place it is not installed, a circuit other than the Base Station's, or people who need waking at alarm volume rather than a notification. Otherwise, for keeping the house secure through a power cut, Ring with cellular backup already does the job.